|
ScaleStick
The ScaleStick is a unique composition blended to provide
superior limescale (calcium carbonate)
prevention and corrosion control in water
fed equipment. The system feeds a controlled amount of specially blended scale
control compounds into the water stream These compounds were chosen because
they provide the most effective treatment for the longest duration. The
specially designed ScaleStick releases ScaleSafe at a constant
rate resulting in consistent scale prevention and corrosion control for
predictable periods of time. No electricity, maintenance or guess work is required. A simple glance at the ScaleStick lets one know when
replacement is needed.
Unlike standard scale control additives
(polyphosphates),
ScaleSafe is unaffected by high temperatures, thus
providing unparalleled treatment for water fed equipment
including steamers,
proofers, combi-ovens, coffee and
expresso machines.
Applications include:
- Coffee & Espresso Machines
- Combi-ovens
- Steamers
- Ice Machines
|
- Reverse Osmosis Systems
- Distillers
- Misting Systems
- Bread Proofer
|
 |
The ScaleStick was specifically designed to fit most
standard 10" pre-filter housings which allows it to be used in existing
applications. |
ScaleStick
Specifications
| Water Flow Rate |
.1-6 gpm |
Rated flow rate dependent on water usage
characteristics & accompanying pre-filtration |
| Capacity: ScaleStick |
2000-6000 gal |
Capacity will vary depending on
application. On flow rates less than 1 gpm, capacities may be reduced
significantly |
| Capacity: 10" Carbon Block |
3750 gal |
Carbon
Block capacities based on chlorine removal only |
| Maximum Feed Pressure |
125 psi |
|
| Maximum Feed Temperature |
100° F |
|
Treatment capacities for the ScaleStick range from 2,000 to
6,000 gallons depending on the application and water usage characteristics. The ScaleStick
will not only prevent formation of new limescale deposits in equipment, it will
remove existing scale over prolonged use.
SCALESTICK SYSTEMS
MODEL
PF-10--SS
Standard Filter Housing with ScaleStick.
DESCRIPTION
The PF-10-SS series utilizes a standard filter housing. Cut off valve required
prior to unit for filter replacement. Available in 1/2" inlet/outlet.
APPLICATION
Low flow rate & volume applications (< 2 gpm). Individual steamer or
combi-oven where usage is less than 6 hours per day. Coffee, espresso, & tea
machines. Hot water dispensers, bread proofers, & ice machines under 400
lbs.
MODEL
FA-SS-SD-TW Twin ScaleStick System
w/ Sediment Pre-filter.
FA-SS-CB-TW Twin
ScaleStick System w/ Carbon Block Pre-filter.
DESCRIPTION
Twin ScaleStick System comes complete with twin mounting bracket, (2) ball
valves, & filter wrench. Pre-filtration flexibility and higher loading
capacities.
APPLICATION
Moderate flow rate & volume applications (1-4 gpm). Individual steamer or
combi-oven where usage is 6 hours plus per day. Multiple coffee, espresso, &
tea machines. Hot water dispensers, bread proofers, & ice machines under 800
lbs.
|
Klorman
