|
ScaleSafe
Specifications
General Information:
The ScaleSafe units are designed with
simplicity and practicality in mind. There are no settings needed, no
electricity required, and no guess work in when the cartridges need replacement.
When applied correctly, ScaleSafe units will consistently feed
product over the life of the cartridge. A simple glance at the housing lets one
know when replacement it needed. All of the systems come in clear or translucent
housings. The product will slowly dissolve over time, and cartridge changes take
a couple of minutes. Each of the units come complete with delivery head,
housing, and mounting bracket.
APPLICATIONS:
SHF-605
The 65,000 gallon water volume treated is ideal for small
commercial applications. The SHF-605 is ideal for any commercial application
where the water flow rate averages 2-8 gpm and does not exceed 15 gpm.
SHF-610
The 135,000 gallon water volume treated is ideal for small commercial
applications.
SHF-410 / SHF-415
These units are for commercial and industrial applications where
high water usage is expected. The
500,000 gallons of water treated allows for less frequent cartridge changes.
Commercial water heater and cooling tower applications are ideal for these
units. Maximum flow rates depend on water pressure and in/out size (1" or 1½").
Please observe the minimum average flow rates for these units. Treat the
water flow rate, not the line size. Just because the line size is
2", does not mean that the flow rate equals the minimum water flow rate
required.
ScaleSafe
Specifications
|
UNIT
|
WATER
FLOW
GPM
|
WATER
VOLUME
TREATED
|
LINE
SIZE
|
SPECIFIC
APPLICATIONS |
| SHF-605 |
1-15
|
65,000 gal. |
3/4" |
Minimum flow rates of
1 gpm. If less than 1 gpm refer to the ScaleStick models. Desired
continuous flow of 1-8 gpm. Peak flow 15 gpm, 3/4” connection. |
| SHF-610 |
5-15
|
135,000 gal. |
3/4" |
Same as SHF-605. Must
have periods of flow above 5 gpm to use entire sump, otherwise, product
will remain undissolved in bottom of sump. |
| SHF-410 |
5
MIN.
FLOW
|
500,000 gal. |
1" |
Minimum flow rates of
5gpm. Desired continuous flow of 5-15 gpm.
Peak flow 30 gpm, 1” connection. |
| SHF-415 |
10
MIN.
FLOW
|
500,000 gal. |
1.5" |
Minimum flow rates of
10 gpm. Desired continuous flow of 10-25 gpm.
Peak flow 60 gpm, 1.5” connection. |
|
Klorman
